Dual channel Lon to fiber optic adapter - CFSL02
Dual channel Lon to fiber optic adapter - CFSL02
Installation:
1)Ensure that the power supply is switched off during installation.
2)Take care when inserting the fibre optic connector to avoid damage. Note:
RX1 should connect to the previous modules TX2.
TX1 should connect to the previous modules RX2.
RX2 should connect to the next modules TX1.
TX2 should connect to the next modules RX1.
3)LonA connects to Net_A of the LonWorks Bus (network card), LonB connects Net_B.
Overview:
1)The multi mode Lon to fiber optic adapter (CFSFL02) allows connection of the Cooper system network (LonWorks) devices through optical fiber, and to allow both point to point or multi drop topology.
2)Using only single-mode fiber optic, the (CFSFL02) adapter allows extension of the Cooper system network LonWorks to a maximum distance of 15km with a transmission speed of up to 78Kbit/s or 1.25Mbit/s.
3)Connection is made using SC type fibre optic connectors. In comparison with conventional twisted pair cable, the fibre optic usage in a LonWorks network has many advantages; it is reliable and fast in long-distance network transmission even in difficult industrial environments (with transients, surges or electromagnetic interference etc.) without requiring any additional transient protection.
Benefits:
1)Simple to install
2)Easy to use
3)Extends Cooper panel network
4)Fast response