LOITHIUM PHOSPHATE SMART BMS

Single cell voltage detection range 1.5V-4.6V.
High precision detection cell voltage error is less than 5MA
Charging current 50A
Discharge current: 120-160A Continuous 320 Peak (Depending on which BMS model you buy)
Balance current :200MA.
Controlled balance mode, when you start charging, the voltage difference can be detected by the voltage difference greater than the set value.
High-precision coulomb counter function temperature control detection Hall speed measurement
Bluetooth connection: support for android with Bluetooth 4.0
Support cells: Support Li-ion, Lipo, 18650, Lifepo4, LTO and so on
Voltage accuracy: Single cell voltage detection range (1.5-4.6V), accuracy error within 3 mV
Overcharge protection
Over discharge protection
Short circuit protection: Up to 320A
Overcurrent protection: maximum 300A
Current detection: within the current range of the BMS
Temperature control protection: The protection board has built-in balanced temperature control, power temperature, and can be connected with 4 temperature sensors to prevent high temperature danger

TECHNICAL PARAMETERS:

16 SERIES, 40A/60A/100A

No.	Test item		Criterion
1	Voltage	Charging voltage	DC:60V 3.6V/Cell
1	Voltage	Balance voltage for single cell	3.60±0.025V
2	Current	Balance current for single cell	72±10mA
		Current consumption	≤20μA
		Maximal continuous charging current	40A/60A/100A
		Maximal continuous Discharging current	40A/60A/100A
3	Over charge Protection	Over charge detection voltage for single cell	3.90V±0.025V
		Over charge detection delay time	0.5S—2S
		Over charge release voltage for single cell	3.80V±0.05V
4	Over discharge protection	Over discharge detection voltage for single cell	2.30V±0.08V
		Over discharge detection delay time	10mS—200mS
		Over discharge release voltage for single cell	2.70V±0.10V
5	Over current protection	Over current detection voltage	150mv±25mv
		Over current detection current	150A ±20A
		Detection delay time	5mS—15mS
		Release condition	Cut load
6	Short protection	Detection condition	Exterior short circuit
		Detection delay time	200-500us
		Release condition	Cut load
7	Resistance	Protection circuitry（MOSFET）	≤20mΩ
8	Temperature	Operating Temperature Range	-40～+85℃
8	Temperature	Storage Temperature Range	-40～+125℃

20 SERIES, 40A/60A/100A

No.	Test item		Criterion
1	Voltage	Charging voltage	DC:72V 3.6V/Cell
1	Voltage	Balance voltage for single cell	3.60±0.025V
2	Current	Balance current for single cell	72±10mA
		Current consumption	≤20μA
		Maximal continuous charging current	40A/60A/100A
		Maximal continuous Discharging current	40A/60A/100A
3	Over charge Protection	Over charge detection voltage for single cell	3.90V±0.025V
		Over charge detection delay time	0.5S—2S
		Over charge release voltage for single cell	3.80V±0.05V
4	Over discharge protection	Over discharge detection voltage for single cell	2.30V±0.08V
		Over discharge detection delay time	10mS—200mS
		Over discharge release voltage for single cell	2.70V±0.10V
5	Over current protection	Over current detection voltage	150mv±25mv
		Over current detection current	150A ±20A
		Detection delay time	5mS—15mS
		Release condition	Cut load
6	Short protection	Detection condition	Exterior short circuit
		Detection delay time	200-500us
		Release condition	Cut load
7	Resistance	Protection circuitry（MOSFET）	≤20mΩ
8	Temperature	Operating Temperature Range	-40～+85℃
8	Temperature	Storage Temperature Range	-40～+125℃

24 SERIES, 40A/60A/100A

No.	Test item		Criterion
1	Voltage	Charging voltage	DC:86V 3.6V/Cell
1	Voltage	Balance voltage for single cell	3.60±0.025V
2	Current	Balance current for single cell	72±10mA
		Current consumption	≤20μA
		Maximal continuous charging current	40A/60A/100A
		Maximal continuous Discharging current	40A/60A/100A
3	Over charge Protection	Over charge detection voltage for single cell	3.90V±0.025V
		Over charge detection delay time	0.5S—2S
		Over charge release voltage for single cell	3.80V±0.05V
4	Over discharge protection	Over discharge detection voltage for single cell	2.30V±0.08V
		Over discharge detection delay time	10mS—200mS
		Over discharge release voltage for single cell	2.70V±0.10V
5	Over current protection	Over current detection voltage	150mv±25mv
		Over current detection current	150A ±20A
		Detection delay time	5mS—15mS
		Release condition	Cut load
6	Short protection	Detection condition	Exterior short circuit
		Detection delay time	200-500us
		Release condition	Cut load
7	Resistance	Protection circuitry（MOSFET）	≤20mΩ
8	Temperature	Operating Temperature Range	-40～+85℃
8	Temperature	Storage Temperature Range	-40～+125℃

Lithium Phosphate Smart BMS